Showing all 6 results

  • Cryogenic Pneumatic Actuated Globe Valve

    Cryogenic Pneumatic Actuated Globe Valve Body: ZGOCr18Ni9 Bonnet: OCr18Ni9 Stem Disc: OCr18Ni9 Disc: OCr18Ni9 Disc Seal ring: PTFE Nominal Diameter: DN10 to DN100 Nominal Pressure: PN1.6 to 6.4MPa Cylinder Source Pressure: PN0.3 to 0.6PMa Suitable Media: LO2,LN2,LAr,LNG,etc Suitable Temperature: -196℃ to +70℃ Emergency Cut-off Temperature: +75±5℃ Dimension DN H L D D1 D2 b 10 […]

  • Feed Water Control Valve

    Feed Water Control Valve Body : A105 Bonnet : A105 Stem : SS304 , 20Cr13 Disc : SS304 , 20Cr13 Seat : SS304 , 20Cr13 Sleeve : SS304 Dimension: PN(Mpa) DN(mm) L H L1 L2 D1 D2 Electric Actuator Electric 10 20 460 870 118 160 28 20 10M 10 32 530 950 136 163 […]

  • Forged Cryogenic Trunnion Ball Valve

    Forged Cryogenic Trunnion Ball Valve Body: Stainless Steel, Cryogenic Alloy Steel, Duplex Stainless steel Floating and Trunnion mounted ball valve(Side and Top Entry) Nominal Diameter: DN15 to DN65 Nominal Pressure: Class 150 to Class 1500 End connection: RF, RTJ, BW Working temperature: -196ºC to +200ºC Medium: Water, Gas , Oil, Nitric acid, Acetic acid Temperature: […]

  • Sale!
    $238.32

    Pressure Reducing Valve

    Pressure Reducing Valve Body :Cast Iron (GG25, HT200) / Ductile Iron (GG40, QT) Seat :410 S.S , SS 304 , SS 316 Stem :410 S.S , SS 304 , SS 316 O-ring washer :Cast Iron O-ring :NBR Disc :Cast Iron (GG25, HT200) / Ductile Iron (GG40, QT) Diaphragm :Rubber Diaphragm Washer :Cast Iron Screw :Bronze […]

  • Pressure Seal Swing Check Valve

    Pressure Seal Swing Check Valve Body: WCB, WC1, WC6, WC9 Disc: WCB, WC1, WC6, WC9 Hinge: WCB, WC1, WC6, WC9 Seat: A105, F22 Gasket: SS316+Graphite Bonnet: A105, F22 Washer: F316 Sealing Ring: Mild Stainless Steel Nominal Diameter: DN65 to DN350 Nominal Pressure: Class1500 to Class2500 Design and Manufacture Standard: API6D, ASME B16.34 Face to Face […]

  • Tilting Disc Check Valve

    Tilting Disc Check Valve Body: Ductile Iron, Cast Iron Disc: Ductile Iron, Cast Iron Shaft: SS420, SS431 Body Seat: SS304 Disc Seal Ring: EPDM, NBR Retainer Ring: Carbon Steel+ss304 Shaft Bearing: SS304 O Ring: EPDM Pin: SS420 End Cover: Carbon Steel+Epoxy Nominal Diameter: DN250 to DN1400 Nominal Pressure: PN1.0 to PN2.5 Design and Manufacture Standard: […]