Rising Stem Gate Valve Manufacturer in USA
Valvesonly is the best Rising Stem Gate Valve Manufacturer in USA. To open and close the valve, the stem of the valve moves up and down in a Rising Stem gate Valve. It is commonly manufactured using Cast Steel and Forged Steel. This type of valve is suitable for working under high pressure and high temperature. By just looking at the valve you can say whether the valve is open or not. A Rising stem Gate valve does not limit the medium that is flowing through the valve and it does not reduce the pressure. Rather than regulating flow, a gate valve is used to shut off and start the flow in the valve. This valve has no blockagein the flow stream, resulting in very low flow resistance. It ensures that there is no leakage. These valves have two positions: fully open and totally closed. The disc is fully removed from the flow stream when the gate valve is opened.
Materials: Cast iron, Cast steel (WCB, WC6, LCB, WCC, LCC, WC9), Ductile iron, SS304, SS316
Class: PN10 to PN 450
ANSI 150 to 2500
Size: 1/2’’to 64’’
Ends: Socket weld, butt weld, Flanged
Operations: Handwheel, Gear Operated, Electric Actuated, Pneumatic Actuated
Advantages of Rising Stem Gate Valve:
- Easy to open and close
- Usually comes in larger sizes
- Resistance to high temperature and high temperature and pressure.
- Requires very low maintenance.
Industries that use Rising Stem Gate Valve
- Food industries.
- Chemical industries.
- Mining industries.
- Water treatment plants.
- Power engineering.
DIN Rising Stem Cast Iron Gate Valve
DIN Rising Stem Cast Iron Gate Valve Body: Cast Iron Bonnet: Cast Iron Disc: Cast Iron Stem: Stainless Steel, Brass Seal Ring: Stainless Steel, Brass Nominal Diameter: DN40 to DN600 Nominal Pressure: PN16 to PN420 Design and Manufacture: DIN3352 F4, DIN3352 F5 Face to Face Dimensions: DIN 3202, ISO5752 Flanged End Dimensions: DIN2501 Test and […]
DIN Rising Stem Ductile Iron Gate Valve
DIN Rising Stem Ductile Iron Gate Valve Body: Ductile Iron Bonnet: Ductile iron Disc: Ductile Iron Stem: Stainless Steel Nominal Diameter: DN40 to DN600 Nominal Pressure: PN16 to PN420 Design and Manufacture: DIN3352 F4, DIN3352 F5 Face to Face Dimensions: DIN 3202, ISO5752 Flanged End Dimensions: DIN2501 Test and Inspection: DIN3220 End Connection: Flanged, Buttweld […]